BFGNT - 2201, BRIGHT COPPER, SPRAY PAINT
- MSDS: BFGNT
- Manufacturer: KRYLON DEPT DIV OF BORDEN CHEM BORDEN INC
- Product Name: 2201, BRIGHT COPPER, SPRAY PAINT
- National Stock Number: 8010-00-584-3152
Product Identification
Product ID:2201, BRIGHT COPPER, SPRAY PAINT
MSDS Date:01/01/1985
FSC:8010
NIIN:00-584-3152
MSDS Number: BFGNT
Responsible Party
NORRISTOWN, PA 19404
US
Cage: JO900
Contractor
Telephone: 800-832-2541/216-566-2917
Cage: 87187
Ingredients
TOLUENE (SARA III)
CAS: 108-88-3
RTECS: XS5250000
Fraction By Weight: 40.0%
OSHA PEL 200 PPM/150 STEL
ACGIH TLV: 50 PPM; 9293
EPA Report Quantity: 1000 LBS
DOT Report Quantity: 1000 LBS
METHYLENE CHLORIDE (DICHLOROMETHANE) (SARA III)
CAS: 75-09-2
RTECS: PA8050000
Fraction By Weight: 25.0%
OSHA PEL 500 PPM; Z-2
ACGIH TLV: 50 PPM, A2; 9394
EPA Report Quantity: 1000 LBS
DOT Report Quantity: 1000 LBS
Hazards
Effects of Overexposure:LIGHTDEADEDNESS, DIZZINESS, HEADACHE, FATIGUE,
MUSCULAR WEAKNESS, MENTAL CONFUSION, NAUSEA, INSOMNIA
First Aid
First Aid:REMOVE TO FRESH AIR.IF SPRAYED IN EYES,FLUSH WITH WATER.
Fire Fighting
Extinguishing Media:DRY CHEM
Fire Fighting Procedures:NORMAL CLASS B FIRE PROCEDURES
Unusual Fire/Explosion Hazard:IF SPRAYED WITHIN 12 IN. OF OPEN FLAME
SPRAY MAY IGNITE & BURN LIKE A BLOWTORCH.
Accidental Release
Spill Release Procedures:REMOVE SOURCES OF IGNITION.SOAK UP WITH
ABSORBENT MATERIAL VENTILATE AREA.MATERIAL NOT DANGEROUS WHEN
SOLVENTS HAVE EVAPORATED.(MFG)
Handling
Handling and Storage Precautions:DO NOT STORE OVER 120F.DO NOT PLACE
CAN ON RADIATOR,STOVE,DIRECT SUNLIGHT OR NEAR OTHER HEAT SOURCES.
Other Precautions:DO NOT PUNCTURE OR INCINERATE CONTAINER.IF BURNER
DONOT BREATH FUMES.USE AIR PACK TO AVOID PAROLYSIS PRODUCT.
Exposure Controls
Respiratory Protection:VENTILATE ADEQUATELY
Ventilation:AS NEEDED TO KEEP AREA BELOW ESTIMATED
Supplemental Safety and Health
VAPOR DENSITY IS UNKNOWN;SPECIFIC GRAVITY IS < WATER
Chemical Properties
HCC:V3
Evaporation Rate & Reference:>1 BUAC
Solubility in Water:SLIGHT
Percent Volatiles by Volume:93.0
Stability
Stability Indicator/Materials to Avoid:YES
Hazardous Decomposition Products:COMBUSTION MAY PRODUCE TOXIC &
IRRITATING CHLORINE COMPOUNDS
Disposal
Waste Disposal Methods:WHEN DRY DISPOSE OF BY INCINERATION OR LANDFILL
IN ACCORDANCE WITH ALL LOCAL,STATE & FEDERAL REGULATIONS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.